Skip to main content

How do I load the filament into an Adventurer 5M Pro?

Learn how to load filament into the 5M Pro

Luke Henderson avatar
Written by Luke Henderson
Updated over a week ago

Step 1:

Unpack your filament, and ensure the end of the filament is straight and clean.

Step 2:

Sit the filament on the hook at the rear of the printer, and feed the filament through the inlet tube until it comes out inside the printer.

Step 3:

On screen, tap the 'filament' tab on the left. Select 'Load' and allow the printer to heat up.

Step 4:

Once the printer has reached temperature, feed the filament into the top of the extruder, ensuring you can see it moving in slowly and feel it being pulled in.

The filament will come out of the nozzle once the loading process is complete.

CDN media
Did this answer your question?